NTAC-22 NMEA Anschutz Course Bus Data Converter

NMEA Anschutz converter is used to NMEA heading data to Anschutz course bus data format.

Overview

In the case of replacing the installed defective Anschutz gyro compass, by converting the NMEA data from the device to be installed to the Anschutz course bus format, you can quickly operate the repeaters and other devices using the Anschutz course bus protocol untouched. You do not have to pull cables and install new devices. In this way, the installed devices are not affected by the replacement. This saves time and costs.

The converter accepts HDT, ROT, THS telegrams to convert signal to Coursebus data. Default input speed is 4800bps, output speed is 9600bps. Different input-output speed options can be adjusted with DIP switches on the board.

The NTAC-22 can be powered within the range of 9~32 VDC. The nominal voltage of 24 VDC is advised for powering the device in normal operation. Power input port has a protection for incorrect polarity connection of the supplying voltage.

It is support STD-20 and STD-22 gyrocompass. The converter has been tested on STD-20 and STD-22 gyro systems.

The converter works on more than 200 vessels.

We ship worldwide.

We are a manufacturer company in marine electronics. Get the best prices.

NMEA Anschutz Converter

Technical SpecificationsSupply Voltage– 9-32VDC Power supplyPower Supply Protection– Reversed polarity protection
– Internal resetable fuseProtocolNMEA0183, IEC61162, Anschutz CoursebusInput data– $xxHDT, $xxROT, $xxTHS NMEA Data
– Can be added according to the recommendationOutput data– Anschutz Coursebus DataInput– 1 x Galvanic isolated InputOutput– 2 x RS422Input Speed– Configurable with DIP Swithces 4800, 9600, 38400, 115200 bpsOutput Speed– Configurable with DIP Swithces 4800, 9600, 38400, 115200 bpsStatus LEDs– NMEA Input
– Power
– System
– Data OutputConnectors– Screw type terminalsCase – Dimensions -Weight– ABS DIN Rail Mount Box
– Width: 105 mm
– Depth: 86 mm
– Height: 58 mm
– 150gr